Is a lead screw on your Bambu Lab printer getting noisy or dry? Lubricant Grease is the official grease for lead screws and for quieting belts against idle pulleys. Lubricant Grease from Bambu Lab is used to lubricate lead screws, or to remove noise between belts and idle pulleys. Bambu Lab lists it for all its printer series. Compatibility: All Series (Bambu Lab Lubricant Grease) Use: lead screws, and noise between belts and idle pulleys Reapply: inspect and reapply the lubricant to lead screws and guide rails about every 3 months White grease. Bambu Lab ships it in two pack types with the same total weight (6 x 1 g or 2 x 3 g), randomly distributed A safety data sheet (MSDS) is available from Bambu Lab Good to know: Bambu Lab's wiki says not to apply lubricating oil or grease to the X-axis carbon rods of the X1 Series or P1 Series. Grease is for lead screws; for linear guides and shafts Bambu Lab uses Lubricant Oil. In the box: Lubricant Grease: either 6 x 1 g or 2 x 3 g. Bambu Lab…