Is the PTFE tube on your Bambu Lab printer slipping out, or is filament getting stuck at the connector? This Bambu Lab PTFE tube connector is the replacement part. The PTFE Tube Connector is a pneumatic connector that holds the PTFE tube in place. It joins the PTFE tube that runs between the buffer and the toolhead, at the back of the printer. Bambu Lab lists it for the P2S, X1C, X1E, P1P, P1S, H2C, H2D Pro, H2S and H2D. Fits: Bambu Lab P2S, X1C, X1E, P1P, P1S, H2C, H2D Pro, H2S and H2D Joins the PTFE tube between the buffer and the toolhead, mounted on the back of the printer Replace it when the PTFE tube cannot be secured (for example it will not stay fixed on the extruder) or when filament cannot pass through it Direction matters: connect the tube from the buffer output to the IN end and the tube from the toolhead to the OUT end. A reversed connection may cause a filament blockage When you are not using an AMS, Bambu Lab says to remove the feed tube connector from the OUT end and…